Dual shaft shredder using tutorial method

1. Operation steps

1 Preparation before starting: Before starting the double-shaft shredder, first check whether the components of the equipment are normal, especially the key parts such as blades and bearings, to ensure that there is no loosening or damage.

2. Placement and adjustment: Select the appropriate crushing chamber according to the materials that need to be crushed, and put the materials into the crushing chamber. Pay attention to the placement of materials to ensure that they can be evenly broken by the blade. For beginners, it is recommended to practice in small batches.

3 Start the machine: Press the start button and the machine starts to work. At this time, it is necessary to pay attention to the operation of the machine, whether there is abnormal noise or vibration.

4 Adjust the crushing effect: according to the actual needs, you can adjust the crushing effect by adjusting the speed of the motor. The higher the speed, the better the crushing effect, but the corresponding wear will also increase. Therefore, in the process of use, we should always pay attention to the operating status of the equipment to ensure safety and effect.

5 Stop and clean up: when the material is broken, press the stop button to stop the machine. Clean the residual materials in the crushing room to ensure smooth use next time.

Ii. Precautions

1 Safety first: The two-axis shredder will produce high noise and vibration during operation, so it is necessary to maintain a certain safe distance and pay attention to the safety of operation. It is strictly forbidden to touch or approach the crushing chamber during the operation of the machine.

2 Material selection: Although the biaxial shredder can handle a variety of hard materials, it may not be suitable for some materials with too high hardness or fragile. For these special materials, other suitable crushing methods are recommended.

3 Regular maintenance: In order to maintain the good performance of the two-shaft shredder and extend the service life, regular maintenance and maintenance are required. Check whether the parts are loose or damaged, and replace the damaged blades or bearings in time. At the same time, the machine is regularly lubricated to ensure its normal operation.

4 Operation training: For the first time to use the two-shaft shredder personnel, it is recommended to conduct operation training or consult professionals. Grasp the correct operation methods and precautions to avoid equipment damage or personal injury due to improper operation.